Hear from Our Customers
You’re not looking for another chore. You want to know if your pool is safe for your kids, why the water looks off, or what’s causing that equipment issue before it gets expensive.
Home test strips give you a rough idea at best. They miss critical details like calcium hardness and total alkalinity—the stuff that quietly damages your pool finish and corrodes your equipment. By the time you notice, you’re looking at repairs that could’ve been avoided.
Professional pool water testing takes the guesswork out. You bring us a sample, we run it through advanced testing equipment, and within minutes you get a full printout showing exactly what’s in your water and what it needs. No trial and error. No wasted chemicals. Just clear answers that help you keep your pool balanced, your equipment protected, and your water safe.
We’ve served Fairplay, GA and surrounding Douglas County communities since 2014. We’re built on over 30 years of hands-on pool construction experience—concrete work, plumbing, custom builds—so we understand how water chemistry affects every part of your pool system.
Fairplay’s growing fast, and more families here are investing in pools as part of their lifestyle. That means more people dealing with water balance issues for the first time. We’ve turned green pools crystal clear, fixed purple water, diagnosed mysterious staining, and walked hundreds of pool owners through what their water actually needs.
We offer water quality testing for free because we know it’s the foundation of good pool care. When you understand what’s happening in your water, everything else gets easier.
Bring us a water sample from your pool—a small container is all you need. We recommend collecting it from elbow-deep in the water, away from return jets, to get the most accurate reading.
We run your sample through our LaMotte Waterlink Spin Disk testing system. This isn’t a visual color-match test. It’s lab-grade equipment that measures pH, chlorine levels, total alkalinity, calcium hardness, cyanuric acid, and other factors that home strips can’t accurately read. The whole process takes two to three minutes.
You get a detailed printout showing your current levels and exactly where they should be. We walk you through what the numbers mean and what steps to take. If your pH is too high, we’ll tell you how much acid to add. If calcium hardness is low and making your water corrosive, we’ll explain why that matters and how to fix it.
You leave with a clear plan. No confusion, no upselling, just honest information about your pool water.
Ready to get started?
Every residential water test includes a complete analysis of the factors that affect your pool’s health and your family’s safety. We test pH levels to prevent eye and skin irritation. We check chlorine to make sure your water is sanitized properly—not undertreated where bacteria grows, and not overtreated where it burns.
We measure total alkalinity, which stabilizes your pH and keeps it from bouncing around. We test calcium hardness because low levels make water corrosive, leading to etching on your pool surface and damage to metal fittings and equipment. We check cyanuric acid, which protects chlorine from breaking down in Georgia’s strong sunlight but causes problems when it gets too high.
In Fairplay’s climate, where pools get heavy use during long, hot summers, water chemistry shifts faster than you’d think. Evaporation concentrates minerals. Rain dilutes chemicals. Sunscreen and body oils throw off balance. Regular professional pool water testing catches these changes before they become visible problems.
You also get our experience. We’ve dealt with every water issue you can imagine, and we know what works in South Georgia conditions. That’s worth more than the printout.
Bring a sample in every two to four weeks during swimming season, and monthly during cooler months when the pool sees less use. That’s the baseline for most residential pools in Fairplay.
If you’re dealing with an issue—cloudy water, algae, staining, or equipment problems—test more frequently until it’s resolved. After heavy rain, a pool party, or any time you’ve added a significant amount of water, it’s smart to test again. Your water chemistry shifts when conditions change, and catching it early prevents bigger headaches.
Think of water testing like checking your car’s oil. You don’t wait until the engine sounds weird. You check it regularly because it’s easier to add a quart than replace an engine. Same logic applies to your pool.
Home test strips give you a rough estimate of pH and chlorine. That’s useful for quick checks between professional tests, but they’re not precise enough to catch problems early or give you the full picture.
Professional water analysis tests more parameters with far greater accuracy. Strips struggle with calcium hardness, total alkalinity, and cyanuric acid—all critical to keeping your pool balanced and your equipment safe. Color-matching on strips is subjective and affected by lighting. Our testing equipment measures exact values digitally.
The bigger difference is interpretation. You might see that your pH is high, but do you know how that’s affecting your chlorine efficiency? Or why your water feels different even though the strip looks fine? Professional testing comes with professional advice. We’ve seen the patterns and know what those numbers mean for your specific situation.
Calcium hardness measures dissolved calcium in your water. When it’s too low, your water becomes aggressive and starts pulling calcium from anywhere it can find it—your pool’s plaster, grout, tile, concrete, and metal equipment.
This causes etching and pitting on your pool surface, staining, rough texture, and corrosion of metal fittings, ladders, and heater elements. You’ll see premature wear on expensive equipment. The damage happens slowly, so most people don’t connect it to water chemistry until it’s already costly.
When calcium hardness is too high, you get scaling—white, crusty deposits on your tile, rough buildup on surfaces, and clogged filters. The water can look cloudy no matter how much you shock it. Both extremes cause problems, which is why testing it regularly matters. Home strips can’t measure this accurately, but professional pool water analysis catches it before you see damage.
Yes, because you stop treating blindly. Most pool owners over-add chemicals trying to fix a problem they haven’t properly diagnosed. You throw in shock, algaecide, pH adjusters—hoping something works. That gets expensive fast, and often makes things worse.
Accurate water testing tells you exactly what’s out of balance and by how much. You add precisely what’s needed, nothing more. Your chemicals work more efficiently because the water is properly balanced. Chlorine is most effective at a pH between 7.2 and 7.8—outside that range, you’re wasting it.
You also avoid the costly damage that comes from unbalanced water. Replacing etched plaster, corroded equipment, or a stained pool surface costs thousands. A free water test every few weeks and a few dollars in the right chemicals prevent all of that. The math isn’t even close.
Don’t try to fix everything at once. We’ll prioritize what needs to happen first based on your specific results. Some adjustments need to happen in sequence because they affect each other.
Typically, you’ll adjust total alkalinity first, then pH, then address chlorine and calcium hardness. If you have algae or cloudy water, we’ll recommend shocking, but only after the pH is in range—otherwise the shock won’t work effectively. Each situation is different, and that’s where professional guidance makes a real difference.
We’ll give you a clear, step-by-step plan with specific products and amounts. Follow it in order, wait the recommended time between additions, and retest after a few days. Most issues resolve quickly once you’re treating the actual problem instead of guessing. If something’s stubborn, bring another sample and we’ll adjust the approach.
It’s completely free. No purchase required, no obligation, no catch. You bring us a water sample, we test it, you get the results and recommendations, and you’re free to do whatever you want with that information.
We offer free water quality testing because it’s how we help pool owners in Fairplay take better care of their pools. When your water is balanced and your pool looks great, you’re more likely to enjoy it and less likely to need emergency repairs. That’s good for everyone.
Some customers buy the chemicals they need from us. Others don’t. Either way, you get the same thorough test and honest advice. We’ve built our reputation on being straight with people, and that starts with giving you accurate information without strings attached.
Local Resources
Useful Links
